logo
Up to 5 files, each 10M size is supported. OK
Yixing Cleanwater Chemicals Co.,Ltd. 86-510-87976997 joy@holly-tech.net
News Get a Quote
Home - News - Decoloring Agent for Textile Wastewater Treatment: Colorless Sticky Liquid Delivers Fast Color and COD Removal

Decoloring Agent for Textile Wastewater Treatment: Colorless Sticky Liquid Delivers Fast Color and COD Removal

November 17, 2026

Yixing Qingtai Purifying Agent Co., Ltd., a water treatment chemical manufacturer established in 1985, is promoting its high-efficiency Decoloring Agent — a colorless or light-colored sticky liquid designed specifically for color removal in textile dyeing and printing wastewater. The product helps mills meet discharge standards without rebuilding their existing treatment lines.

What Is the Decoloring Agent?

The decoloring agent is a high-molecular-weight cationic polymer supplied as a colorless or light-colored, transparent to slightly viscous liquid. It is fully water-soluble and works at ambient temperature. When dosed into dyeing effluent, its positively charged polymer chains neutralize the negative surface charge carried by reactive, disperse, acid and direct dye molecules. Charge neutralization is followed by bridging flocculation, so the color bodies are captured into dense flocs that settle quickly and are removed in the clarifier.

Because the reaction is physical-chemical rather than biological, the decoloring agent keeps working in effluent that is saline, hot, or hostile to activated sludge — a common reality in dyehouse wastewater.

Typical Technical Specification
PropertyValue
AppearanceColorless to light-colored (light yellow) sticky liquid
Solid content≥ 50%
pH value (1% aqueous solution)3.0 – 6.0
Viscosity (25 °C)50 – 500 mPa·s
Water-insoluble matter≤ 0.5%
Specific gravity1.10 – 1.20
Working pH range6 – 9 (optimum 7 – 8)
Performance You Can Expect
IndicatorResult
Color (chroma) removal90% – 99% on reactive and disperse dye effluent
COD removal50% – 75% in combination with PAC / PAM
Suspended solids removalup to 95%
Floc settling time3 – 8 minutes
Sludge volumeNoticeably lower than conventional alum-based decoloring routes
Where It Is Used
  • Textile dyeing and printing wastewater — reactive, disperse, acid, vat and direct dyes
  • Dye intermediate and pigment production effluent
  • Paper and pulp mill black liquor and coating wastewater
  • Leather tanning, printing ink, and paint workshop effluent
  • Landfill leachate and municipal sewage with high color load
How to Apply It
  1. Dilute the sticky liquid with clean water to a 5% – 10% working solution before dosing. Never dose the concentrate directly into a small stream.
  2. Adjust pH of the effluent to 7 – 8 for best color removal.
  3. Jar test first. Typical dosage is 30 – 200 ppm (0.03 – 0.2 kg per m³), depending on dye concentration and chroma.
  4. Dose under rapid mixing (150 – 250 rpm) for 1 – 2 minutes, then slow mix (40 – 60 rpm) for 5 – 10 minutes to grow flocs.
  5. Optimize with coagulant aids. For heavy loads, use PAC as primary coagulant and a small amount of anionic PAM to speed settling.
Why Mills Choose This Decoloring Agent
  • Fast and visible — near-clear supernatant within minutes, easy for operators to judge by eye
  • Wide applicability — one product covers mixed dyehouse effluent instead of matching a chemical to every dye class
  • Low sludge, low secondary pollution — no iron or aluminum salt sludge build-up
  • Compatible with existing coagulation, sedimentation, DAF and biological polishing stages
  • Stable supply — 200-employee plant, more than 35 years of production experience
Packing, Storage and Supply

The decoloring agent is packed in 200 L plastic drums, 1000 L IBC totes, or ISO tanks for bulk orders. Store indoors between 5 °C and 40 °C, keep containers closed, and use within 12 months. Freeze should be avoided; if the liquid thickens in cold weather, warm gently and stir before use.

As a manufacturer with 50% – 60% of output exported, we supply OEM and private-label programs, provide free samples for jar testing, and support dosing trials with our technical team. Send us your effluent parameters — chroma, COD, pH and daily flow — and we will recommend a dosing plan and a matching treatment train.