|Main ingredient||Pseudomonas , Bacilli , nitrification bacteria and denitrification bacteria corynebacterium , chromobacter , alcaligenes , agrobacterium , arthrobacterium and other bacterias.|
|Viable Vibrio||≥20 billion/g|
|Application||This product is suitable for municipal waste water treatment , chemical waste water , dyeing and printing waste water , landfill leachate, food waste water and other waste water treatment.|
1) The ammonia nitrogen is highly efficient degradation, absorption.
2) to improve the efficiency of nitrification, nitrification system to maintain the long-term stability.
3) rapid recovery from shock load and sudden change of denitrification caused by chaotic state.
4) high concentration of ammonia nitrogen buffer has a good role to help other microorganisms to better adapt to the wastewater environment.
5) the safety factor of the system to reduce the impact of denitrification to a minimum.
6) to improve the low temperature seasons of ammonia removal capacity, reduce the low temperature on the impact of nitrification.
■The product contains nitrobacterium , which could shorten acclimation and form-film time of
activated sludge , fasten the start of sewage treatment system , reduce waste water retention
time , improve processing capacity.
■This product as an environment friendly , high efficiency microbial agent , contains
decomposition and composition bacteria , anaerobic bacteria , amphimicrobe and aerobic
bacteria , is a multi-strain coexistence of organisms. With synergy of all bacteria , this agent
decomposes refractory organic into micro-molecules , further decompose into nitrogen ,
carbon dioxide and water , effectively degrade ammonia nitrogen and total nitrogen , no
■With adding ammonia degrading bacteria agent , could improve ammonia nitrogen waste
water treatment efficiency by more than 60% , no need to change treatment process , reduces
Tests indicate that these physics and chemistry parameters have best effects for bacterial growth:
●Micro-element:Special bacterial growth need many elements , such as potassium , iron ,
calcium , sulfur , magnesium.
●PH:average range is 5.5~9.5 , most rapid growth range is 6.6~7.8 , the best treatment efficiency
PH is 7.5.
●Temperature:Take effect in 8℃~60℃.Higher than 60℃ , may cause the bacterial death , lower
than 8℃ , will limit bacterial cell growth. The best temperature is 26~32℃.
●DO:Make sure the dissolving oxygen in aeration tank , at least 2mg/L , the bacterial treatment
rate to metabolism and degradation will speed up 5-7 times in enough oxygen.
●Salinity:Suitable for high salinity industrial waste water , 60% salinity top.
●Poison resistance:Resistance to chemical toxicity , including chloride , cyanide , and heavy
Note:when there is bactericide in polluted area , its function to microbial should be predicted in